Optimizing energy efficiency in brackish water reverse osmosis (BWRO): A comprehensive study on prioritizing critical operating parameters for specific energy consumption minimization.

Reverse osmosis (RO) systems offer a viable solution for treating brackish water (BW), a common but underutilized water resource. However, the energy-intensive nature of brackish water reverse osmosis (BWRO) systems poses affordability challenges to water supply, necessitating a focus on minimizing their energy consumption to support SDG6's goal of providing safe and affordable drinking water for all. This study addresses the critical need to minimize the specific energy consumption (SEC) of a typical BWRO system, defined as the energy consumed per unit of water recovered, mathematically and experimentally. Empirical models were developed proving there is a global minimum SEC while adjusting the operating conditions. Furthermore, we identified the key operating factors influencing SEC and their priority levels, along with their interactive effects. Notably, no prior study has discussed the significance and interaction of these operating factors (e.g., feed water salinity, temperature, pressure, flowrate and membrane permeability) on SEC of a BWRO system. Employing a full factorial experimental design with mixed levels of operating parameters, the study developed regression models that elucidate the mechanistic interaction between these parameters and system performance. Moreover, the models were validated experimentally, with a new dataset demonstrating their accuracy and reliability. ANOVA statistical analysis identified feed salinity, pressure, flow rate, feed flow rate×pressure, salinity×pressure, and temperature as influential operating parameters in reducing SEC, in descending order of importance. Operating within the determined optimum range resulted in a 36 % decrease in SEC and a more than fourfold increase in water recovery. The study's systematic approach and findings can be extrapolated to optimize the performance of other desalination technologies and diverse feed water types, contributing significantly to global water sustainability efforts.

Life-Cycle Assessment (LCA) Analysis of Algal Fuels.

Life-cycle assessment (LCA) is one of the most attractive tools employed nowadays by environmental policy-makers as well as business decision-makers to ensure environmentally sustainable production/consumption of various goods/services. LCA is a systematic, rigorous, and standardized approach aimed at quantifying resources consumed/depleted, pollutants released, and the related environmental and health impacts through the course of consumption and production of goods/service. Algal fuels are no exception and their environmental sustainability could be well scrutinized using the LCA methodology. In line with that, this chapter is devoted to present guidelines on the technical aspects of LCA application in algal fuels while elaborating on major standards used, i.e., ISO 14040 and 14044 standards. Overall, LCA practitioners as well as technical experts dealing with algal fuels in both the public and private sectors could be the main target audience for these guidelines.

Brackish water desalination using electrodialysis: predictive mass transfer and concentration distribution model along the electrodialyzer.

This study employs theory and experimental data from a laboratory-scale electrodialyzer to predict sodium chloride (NaCl) mass transport and concentration distribution along the electrodialyzer as a function of feed concentration, feed flow rate, applied voltage, and pressure. Moreover, a model was developed to predict the ion removal as a function of driving forces through solving the complete Navier-Stokes, continuity, and steady state Nernst-Planck equations by the finite difference numerical method. The findings of the experiments confirmed that concentration distributions are nonlinear along both the dilute and concentrate compartments. The results also demonstrated that increases in pressure and feed flow rate have a negative effect on salt removal, linear and nonlinear for pressure and flow rate, respectively. In the investigated ranges, higher voltage increased salt removal at a constant feed concentration.

An empirical/theoretical model with dimensionless numbers to predict the performance of electrodialysis systems on the basis of operating conditions.

Among the different technologies developed for desalination, the electrodialysis/electrodialysis reversal (ED/EDR) process is one of the most promising for treating brackish water with low salinity when there is high risk of scaling. Multiple researchers have investigated ED/EDR to optimize the process, determine the effects of operating parameters, and develop theoretical/empirical models. Previously published empirical/theoretical models have evaluated the effect of the hydraulic conditions of the ED/EDR on the limiting current density using dimensionless numbers. The reason for previous studies' emphasis on limiting current density is twofold: 1) to maximize ion removal, most ED/EDR systems are operated close to limiting current conditions if there is not a scaling potential in the concentrate chamber due to a high concentration of less-soluble salts; and 2) for modeling the ED/EDR system with dimensionless numbers, it is more accurate and convenient to use limiting current density, where the boundary layer's characteristics are known at constant electrical conditions. To improve knowledge of ED/EDR systems, ED/EDR models should be also developed for the Ohmic region, where operation reduces energy consumption, facilitates targeted ion removal, and prolongs membrane life compared to limiting current conditions. In this paper, theoretical/empirical models were developed for ED/EDR performance in a wide range of operating conditions. The presented ion removal and selectivity models were developed for the removal of monovalent ions and divalent ions utilizing the dominant dimensionless numbers obtained from laboratory scale electrodialysis experiments. At any system scale, these models can predict ED/EDR performance in terms of monovalent and divalent ion removal.

A review of polymeric membranes and processes for potable water reuse.

Conventional water resources in many regions are insufficient to meet the water needs of growing populations, thus reuse is gaining acceptance as a method of water supply augmentation. Recent advancements in membrane technology have allowed for the reclamation of municipal wastewater for the production of drinking water, i.e., potable reuse. Although public perception can be a challenge, potable reuse is often the least energy-intensive method of providing additional drinking water to water stressed regions. A variety of membranes have been developed that can remove water contaminants ranging from particles and pathogens to dissolved organic compounds and salts. Typically, potable reuse treatment plants use polymeric membranes for microfiltration or ultrafiltration in conjunction with reverse osmosis and, in some cases, nanofiltration. Membrane properties, including pore size, wettability, surface charge, roughness, thermal resistance, chemical stability, permeability, thickness and mechanical strength, vary between membranes and applications. Advancements in membrane technology including new membrane materials, coatings, and manufacturing methods, as well as emerging membrane processes such as membrane bioreactors, electrodialysis, and forward osmosis have been developed to improve selectivity, energy consumption, fouling resistance, and/or capital cost. The purpose of this review is to provide a comprehensive summary of the role of polymeric membranes in the treatment of wastewater to potable water quality and highlight recent advancements in separation processes. Beyond membranes themselves, this review covers the background and history of potable reuse, and commonly used potable reuse process chains, pretreatment steps, and advanced oxidation processes. Key trends in membrane technology include novel configurations, materials and fouling prevention techniques. Challenges still facing membrane-based potable reuse applications, including chemical and biological contaminant removal, membrane fouling, and public perception, are highlighted as areas in need of further research and development.